Knauf Blown In Insulation Nationwide

Knauf Blown In Insulation in Houston: What to Know First

We install and service Knauf blown-in insulation for Houston homeowners, and most jobs are completed in a single day. A typical Knauf blown-in attic project in Houston runs $1,400 to $3,800 depending on square footage, current R-value, and whether old insulation needs removal first. This page is for homeowners who already have Knauf product in their attic, or who want to know if Knauf is the right material before they commit. If you want a straight number for your attic, call (806) 581-1010 and we’ll give you a written price before any work starts.

Call (806) 581-1010

How Knauf Products Fail – and How We Fix Them

Knauf makes a solid fiberglass product, but in Houston’s humidity, certain failure patterns show up more often than others. Here’s what we actually see in attics around Meyerland, Katy, Spring, and the Heights:

• Settling below the top plate in Knauf Jet Stream and Performance+ attics. Fiberglass blown-in insulation loses loft over time, especially when original installs skimped on depth. We regularly find Knauf attics in Houston that started at R-30 and have settled to R-19 or worse. The fix is a density re-blow to the depth that actually delivers the R-value on the bag, not the label on the original invoice.
• Wind washing at the eave line. Houston gets real wind, and blown Knauf fiberglass is light enough to get pushed back from the soffit edges. That leaves a cold stripe along the exterior walls. We install baffles and re-blow the perimeter so the insulation actually covers the top plate where the thermal boundary lives.
• Moisture-damaged Knauf from roof leaks or bath-fan exhaust. Fiberglass loses its insulating capacity when it gets wet and compressed. In Houston attics with poor ventilation, we find Knauf insulation that’s holding moisture against the ceiling drywall, which leads to stains and lost R-value. We remove the bad material, fix the air-sealing issue, and re-blow with fresh Knauf to the correct depth.
• Uneven coverage in cathedral and knee-wall cavities. Knauf blown-in works poorly when it’s dumped into sloped cavities without proper containment. We see this in older Houston homes with finished attic spaces. The fix is dense-packing the cavity or switching to a batt solution where blown material can’t sit evenly.
• Older Knauf open-blow material with no air sealing underneath. Blown-in insulation is not an air barrier. In Houston’s climate, air moving through the ceiling plane carries moisture into the attic, and that moisture condenses against cold surfaces. We air-seal the ceiling plane before any Knauf re-blow, because the insulation only does its job when the air movement is stopped first.

Our Knauf Blown In Insulation Process

Here’s what a Knauf blown-in insulation job looks like with Alden Insulation Houston, from first call to cleanup:

1. 1
   Call and in-home assessment. We walk the attic, measure existing depth, check for air leaks, and read the current R-value. Bryce Holloway has been reading Houston attics this way for over a decade, and he does it methodically, no guessing.
2. 2
   Written price, before any work starts. You get a number on paper. If it fits your budget, we schedule the work. If it doesn’t, you keep the number and we leave without a hassle.
3. 3
   Prep and air sealing. We seal penetrations at the ceiling plane: top plates, wire runs, plumbing vents, and can-light housings. This is the step most contractors skip, and it’s the reason some Houston attics never feel right no matter how much insulation is up there.
4. 4
   The Knauf re-blow or new install. We run the Knauf product through our equipment to the exact depth that delivers the R-value you’re paying for. We mark the depth with attic sticks so you can see it with your own eyes.
5. 5
   Final inspection and documentation. We walk the attic again, check the depth at multiple points, and hand you the written guarantee. If anything fails within 365 days, we come back at no charge. That’s the Done Right Promise, and it’s in writing.

What Knauf Blown In Insulation Costs in Houston

Most Knauf blown-in insulation projects in Houston run $1,400 to $3,800. A straight top-off on a 1,500-square-foot attic where the existing Knauf is in decent shape usually lands between $1,400 and $2,200. A full removal and re-blow because of moisture damage or vermin contamination runs $2,800 to $3,800 depending on how much material has to come out.

What moves the price: square footage, current R-value, access difficulty, and whether removal is required. We don’t quote over the phone without seeing the attic, because an honest number requires an honest look. Call (806) 581-1010 and we’ll schedule a free assessment. The price we hand you is the price on the invoice.

Why Houston Homeowners Call Alden Insulation Houston for Knauf Work

We’re independently owned and operated, held to The Garrison Standard, which means every job gets a written price and a written 365-day guarantee. Our technicians are background-checked and arrive in uniform inside the scheduled window, not a vague half-day range. We install products from eight brands, including Knauf, Owens Corning, Johns Manville, and GreenFiber, so if Knauf isn’t the right material for your attic, we’ll tell you and offer a better match. We also work with Reflectix for radiant barrier applications where the Houston roof deck needs it. Calls are answered by a live person, 24/7. No voicemail, no form, a real human being.

FAQs