Owens Corning Insulation Removal in Houston: What to Know First
Owens Corning insulation removal in Houston typically takes one full day for most single-story attics, and our written estimate is in your hand before any equipment comes off the truck. We’re an independent Owens Corning service provider, not an authorized dealer, which means we answer to you and the building code, not a corporate warranty department. Most homeowners we remove Owens Corning insulation for in Houston pay between $1,200 and $3,400 depending on square footage, access, and what we find once we’re in the attic.
This page is for Houston homeowners who have Owens Corning batt, blown-in, or spray-applied insulation that’s wet, moldy, pest-damaged, or simply underperforming after years of Gulf Coast humidity. If that’s you, call (806) 581-1010 and a live person answers, 24/7. We’ll schedule an attic inspection and give you a written price before any work begins.
How Owens Corning Products Fail – and How We Fix Them
We’ve pulled Owens Corning insulation out of hundreds of Houston attics, and the failure patterns are consistent. Here’s what we actually see:
- Owens Corning EcoTouch Pink Fiberglass batts with moisture saturation. The kraft paper facing on EcoTouch batts acts like a sponge in Houston’s humidity. Once attic ventilation is compromised, or a bathroom fan dumps moisture into the attic, the paper facing wicks water and holds it against the fiberglass. The result is mold, reduced R-value, and sometimes drywall staining on the ceiling below. We remove the batts, assess the decking, and address the ventilation issue before anything new goes in.
- Owens Corning AttiCat blown-in fiberglass that’s compacted or settled. AttiCat is a solid product, but it settles over time, especially in older Houston homes where the original blow was thin. When it drops from R-38 to R-19 because of settlement, removal and a fresh blow at the correct density is the only real fix. We don’t top it off and call it done. We remove the compromised material so we can see what’s happening underneath.
- Rodent activity in Owens Corning batts and blown-in. Rats and squirrels love fiberglass insulation for nesting, and once they’ve been in an attic, the insulation is contaminated with droppings and urine. Owens Corning doesn’t tell you this, but fiberglass doesn’t stop rodent entry. We remove the contaminated material, identify entry points for a pest contractor to seal, and then re-insulate clean.
- Owens Corning FOAMULAR XPS rigid board that’s been installed incorrectly. FOAMULAR is designed for below-grade and exterior applications. When we find it in Houston vented attics, it’s often trapping moisture against roof decking or blocking soffit vents. We remove it, inspect the decking for rot, and rebuild the thermal boundary correctly.
- Spray foam issues from Owens Corning’s Icynene-era open-cell products. While Owens Corning has shifted its spray foam lineup, older open-cell applications in Houston attics have failed due to improper mixing or application during humid months. Open-cell that was sprayed too thick in one pass doesn’t cure fully, leaving a tacky, off-gassing mess that needs full removal. We’ve handled those jobs, and they’re not DIY territory.
Our Owens Corning Insulation Removal Process
- 1
Attic inspection and written estimate. A background-checked, uniformed technician walks your attic, measures square footage, checks R-value, and documents what’s up there. You get a written price before any work starts.
- 2
Material identification and scope confirmation. We identify the exact Owens Corning product and its condition. If there’s moisture, we find the source. If there’s pest damage, we flag it. The written price doesn’t change unless you approve a change in scope.
- 3
Containment setup. We seal off the attic access with poly, run containment ducting, and protect your floors from the hatch to the truck. No dust in the living space.
- 4
Removal and bagging. We use HEPA-filtered commercial vacuums for blown-in and hand-remove batts and board stock. All material is bagged and hauled off. Your attic is left clean enough to see the decking.
- 5
Decking and air-sealing assessment. With the insulation gone, we can see what’s actually happening. If air leaks or damaged decking are present, we’ll document them and price the fix separately if you want it.
- 6
Re-insulation and guarantee. We install new insulation from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, or GreenFiber, depending on your attic and budget. Everything is covered by our 365-Day Done Right Promise, in writing.
What Owens Corning Insulation Removal Costs in Houston
Here are the price ranges we’ve quoted and honored on Houston Owens Corning removal jobs this year:
- Blown-in AttiCat removal, 1,000-1,500 square feet: $1,200-$1,800
- Batt removal with mold or moisture damage, 1,200-1,800 square feet: $1,800-$2,800
- Contaminated insulation removal after pest damage: $2,000-$3,400 (includes sanitization of decking)
- Full removal with re-insulation to R-38: $3,500-$6,500 depending on material choice
What moves the price is square footage, access (if your attic hatch is in a closet with no room for equipment, that changes logistics), the condition of the material, and whether there’s contamination requiring special handling. We never charge for the estimate. Call (806) 581-1010 and we’ll give you a written number that doesn’t change at the door.
Why Houston Homeowners Call Alden Insulation Houston for Owens Corning Work
We’re part of the Garrison Partners family, established in 2002, and every job we do operates under The Garrison Code. That’s not a slogan. It’s the operating standard Bryce Holloway and every crew member works from: written prices, written guarantees, and accountability that lasts a full year. If the work fails within 365 days, we return at no charge. No phone tag, no disputes, no re-quoting.
Our techs have been running Houston attics long enough to know that a Meyerland slab home and a Kingwood pier-and-beam have entirely different insulation failure patterns. We install and remove products from eight brands, including Reflectix, so nobody’s pushing a single material on you. Good insulation doesn’t announce itself – you notice it on your utility bill. And when it fails, we’re the ones who make it right.
FAQs
Removing Owens Corning insulation yourself almost certainly voids any remaining material warranty, but hiring a professional removal contractor doesn’t necessarily do the same, depending on why it’s being removed. Most warranties on fiberglass and blown-in products are limited and don’t cover moisture damage or pest contamination anyway. As an independent Owens Corning service provider, we can document the removal and help you understand what warranty coverage, if any, still applies. Call (806) 581-1010 and we’ll walk you through it.
Most single-story Houston attics are fully removed in one day. Two-story homes or attics with extensive contamination can run two days. We’ll give you a firm window before we start, and the crew shows up inside it. Our techs arrive in uniform and you’ll know their names before they walk through your door.
Sometimes it’s cheaper in the short term, but if the existing material is wet, moldy, or pest-contaminated, adding new insulation on top creates a bigger problem later. You’ll be paying twice. We’ll tell you honestly during the inspection whether removal is necessary or whether a top-up will do the job. Call (806) 581-1010 for a written assessment, free of charge.
Yes, in most Houston homes we can remove and re-insulate in the same day if the attic is dry and the decking is sound. We’ll know once we’re in there, and the re-insulation price is in the written quote before you commit to anything. Brands we install include Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber, so you can research every option before saying yes.
Yes, we remove failed open-cell and closed-cell spray foam applications, including older Owens Corning spray foam jobs. Spray foam removal is labor-intensive and requires careful scraping, sometimes grinding, and full containment. It’s not a job you want a generalist doing. We quote it accurately because we’ve done it enough times to know how long it actually takes. Call (806) 581-1010 for a written estimate.
Written by Bryce Holloway, Owner, Alden Insulation Houston at Alden Insulation Houston, serving Houston and nearby areas.