Owens Corning Blown In Insulation Nationwide

Owens Corning Blown In Insulation in Houston: What to Know First

We install Owens Corning blown in insulation in Houston on a straightforward schedule: most attic jobs are done in one day, start to finish. You get a written price before any work begins, so there’s no revision at the door. If you’re calling about a top-up, a full re-insulate, or a removal and replacement, this page tells you what to expect and what it costs.

Call (806) 581-1010

This page is for Houston homeowners who already have Owens Corning product in their attic, or who are considering it and want a straight answer from an independent Owens Corning service provider. We are not affiliated with or authorized by Owens Corning. We’re an insulation contractor that installs their products alongside seven other brands, which means we can tell you honestly what Owens Corning does well and where it falls short in a Houston attic. Call (806) 581-1010 if you want to talk it through with a live person, any hour.

How Owens Corning Products Fail – and How We Fix Them

Owens Corning makes a solid blown-in fiberglass product. Most of what we see in Houston attics isn’t a manufacturing defect; it’s a mismatch between the product and the house it went into. Here are the five failures we’re called out for most often:

• AttiCat Pink Fiberglas settling below labeled R-value. Owens Corning’s AttiCat system is popular for good reason: it’s fast to install and the bags are easy to run through a machine. But in Houston’s humidity, we routinely find attics where the settled depth is two to four inches below what the original installer promised. The label on the bag assumes ideal conditions, not a vented attic in Meyerland in August. We re-measure the settled depth and square footage, then top up to the R-value the house actually needs. Most Houston homes built before 2000 are sitting at R-19 to R-30 when they should be at R-49 or better.
• Unconditioned attic air is eating the insulation’s performance. This is the most underdiagnosed failure in Houston. An Owens Corning blown-in blanket only works as well as the ceiling plane it sits on. If the original install didn’t address recessed lights, plumbing chases, or the attic hatch, conditioned air is leaking right through the new insulation and making the upstairs room feel like a greenhouse. We don’t just top up; we air seal the penetrations before the insulation goes down. That’s the difference between buying R-value and actually getting it.
• Pink fiberglass in a flood zone doesn’t dry out. Owens Corning fiberglass is inorganic; it won’t rot. But when a slab home in Bellaire or Meyerland takes water during a hurricane, the fiberglass holds that moisture like a sponge against the ceiling drywall. It won’t dry in a Houston attic. We remove the wet material, treat the cavity, and re-insulate once the house is dry. Leaving wet fiberglass in place is how you get mold on the ceiling side, not just in the attic.
• Rodent activity in the existing Owens Corning blanket. AttiCat fiberglass is not a barrier to rats or squirrels; it’s bedding. We find tunnels and nests in every part of Houston, and the offending material has to come out before new insulation goes in. Removing and replacing contaminated blown-in is a job we do regularly, and it’s one of the few times we recommend full removal over top-up.
• Undersized install from a previous “good deal.” A lot of Owens Corning work in Houston was done by contractors who ran the machine fast and blew to a whisper-thin depth. The product is fine. The install wasn’t. We re-blow to the correct depth and R-value, document it with before and after photos, and give you the written guarantee so you’re not taking our word for it.

Our Owens Corning Blown In Insulation Process

Here’s what a typical Owens Corning blown in insulation job looks like with us, from first call to cleanup:

1. 1
   Call and schedule. A live person answers at (806) 581-1010. We set a window and the crew shows up inside it. Uniformed, background-checked.
2. 2
   Attic inspection. We look at what’s there now, measure settled depth, check for air leaks, and note any electrical or venting issues that need attention before insulation goes down.
3. 3
   Written price. You get a number in writing before a single tool comes off the truck. That’s the number on the invoice. No revision at the door, no surprise line items.
4. 4
   The work. We remove old material if needed, air seal penetrations, and blow Owens Corning AttiCat fiberglass to the R-value we agreed on. The machine is calibrated and the crew checks depth as they go.
5. 5
   Verification. We walk the attic, confirm depth and coverage, and photograph it. You get the photos. We don’t ask you to climb a ladder to check our work; we show you.
6. 6
   The guarantee. Every job gets our 365-Day Done Right Promise in writing. If the work fails inside a year, we return at no charge. That’s a free second visit included, in writing, on every job.

What Owens Corning Blown In Insulation Costs in Houston

Most attic insulation projects in Houston run $1,600 to $4,800 depending on square footage, current R-value, and whether we’re topping up or doing a full removal. A straightforward top-up in a 1,500 square foot attic might land around $1,800 to $2,400. A full removal and re-insulate with air sealing runs higher, typically $3,500 to $5,500, because of the labor to extract decades of old product and the prep work that goes into the ceiling plane.

• Square footage: Attic size drives material volume.
• Current depth: The more old insulation to remove, the higher the labor.
• Air sealing scope: More penetrations means more prep time.
• Access: Tight or low-slope attics slow a crew down.

You get the written price before work starts. Call (806) 581-1010 and we’ll schedule the attic inspection that gets you an exact number.

Why Houston Homeowners Call Alden Insulation Houston for Owens Corning Work

We’re part of the Garrison Partners family, established 2002, and we operate under The Garrison Standard. That means written prices, written guarantees, and a background-checked crew that shows up inside the window it promised. The 365-Day Done Right Promise isn’t a line on a brochure; it’s a written guarantee on every job, and if the work fails within a year, we come back at no charge.

Bryce Holloway runs crews in Houston and has been doing insulation work in this area for well over a decade. He’s the one reading your attic the way a mechanic reads an engine: methodically, without guesswork. When Owens Corning product is right for the house, we install it. When it’s not, we carry Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, GreenFiber, and Reflectix so you’re not locked into one manufacturer’s answer. Good insulation doesn’t announce itself; you notice it on your utility bill.

FAQs